Invisible optical cable is the abbreviation for transparent tight-buffered optical cable covered with hot melt glue. It is an optical cable composed of G.657.B3 optical fiber, a transparent tight jacket layer, and a layer of hot melt adhesive.Each layer is extruded step by step using an extrusion process, with a nominal outer diameter of 1.2mm. The application of invisible optical cable is the application where the user does not accept the entry of the leather cable to the home or solves the problem of the user's difficulty in entering the home, especially in the old residential area and office.The optical fiber used is a G.657.B3 optical fiber with a small bending radius of 5 mm. When laying, there is no need to nail, make brackets, perforate, make pipes, etc., to destroy the original indoor structure, or because of the discontinuity of laying,the optical cable will sag or fall off and other safety hazards. At the same time, because the optical cable is almost transparent, it will not affect the indoor Beautiful, simple construction method, only need hand-held heating installation tools to complete the laying project.

Features

The layers are tight and not separated, almost transparent;
Special tight sleeve layer, good peelability;
Special hot melt adhesive, strong bonding performance;
The outer surface is smooth, with no visible holes, scars and other defects;
The small bending radius reaches 5mm, and there is no dead corner laying indoors;
Hand-held laying tools, no complicated wiring methods, convenient and fast;
Plug-in tools, resource saving, green and environmental protection.

Application

Used in access network oras access cable from outdoorto indoor in customer premises network.
Used as access building cable in premises distribution system,especially used in indooror outdoor aerial access cabling.

Specification

Unifiber, a Hi-Tech company specialized in developing and manufacturing optical fiber products. Based on strong hardware development, we are offering the most cost-effective cabling solutions on optical networking, data center, FTTx and OEM solution.

Our featured products includes FTTA Waterproof Connectors, indoor/outdoor armored cable assembly, Pre-terminated Multifiber Cables, FTTH flat drop patch cable, LC Uniboot, 6~12 fiber pigtails and MTP/MPO series. We can also provide adapter, attenuator, fused coupler, PLC Splitter, WDM and various of patch panel, terminal box, ODF and tool series products..

Providing the highest quality products and services is always the most important principle to Unifiber, All our products are subjected to strict test according to BELLCORE standard and fully RoHS compliant. Through the efforts of our team, Unifiber has obtained a widespread acknowledgement, Our products continue to enjoy growing acceptance both in China and abroad.