Cat6 SFTP Patch Cable

Cat6 S/FTP Patch Cable, Pure 100% Copper, 23 AWG Stranded Cable

To prevent interference and signal loss, extreme shielding is done to the network cable. Cat6 Shielded/Screened Foiled Patch Cables are useful for conditions where proximity to high power, or RMI equipment may result in crosstalk, and it is great for areas where electromagnetic interference may occur.

Our network Cat6 S/FTP patch cables are terminated with premium grade 50 Micron gold plated contacts RJ45 connectors at both ends. The Cat6 S/FTP version is made for Fast Ethernet (10/100BASE-T) and Gigabit Ethernet (1000BASE-T) delivering up to 100 MHz bandwidth. Our high-quality Ethernet Cat6 S/FTP cables meet and exceed ANSI/TIA-568-C.2 standards.

All our cables are UL Listed, ETL Verified and RoHS Compliant. We carry non-booted and snagless booted strain relief shielded and foiled Cat6 cables with a variety of colors to choose from.

Shielded Cat6 Molded Snagless Boot, Strain-Relief S/FTP Patch Cables

Construction of Unifiber Cat6 S/FTP Snagless Boot Patch Cord

Cat6 S/FTP Patch Cable is composed of four twisted pairs of 100% copper wire, each wrapped with a foil shielding before an overall drain wire and shield is wrapped around the conductors. The conductors are made from stranded cables, each pairs of wires twisted tighter to eliminate crosstalks and ANEXT and covered with foil.

RJ45 plugs are terminated at each end of the snagless booted cable by injection molding. Injection molding not only ensures that the cable is pushed right into the connector, but also makes sure that each individual wires are snug securely and efficiently in place.

Benefits

What’s great with shielded cables is we get the best benefits of a robust and durable cable for harsh environments. Further protection is safely implemented with the strain relief snagless boots at each end that support the RJ45 plugs.

Applications

Frequent connection and disconnection may pose strain and breakage to the patch cables. That is why the Cat6 S/FTP snagless booted patch cable has a special feature of having higher mating cycles than FTP and UTP cables and is best for applications requiring the highest cable performance in EMI-exposed environments.

Cat6A Ethernet S/FTP Patch Cable, Non-Booted Crimped/Assembly Style

Construction of Unifiber Cat6 S/FTP Non-Booted Patch Cord

Our Cat6 Non-booted S/FTP cables are constructed by stripping the cable into the standard patch cable length, and a 50-micron, gold-plated RJ45 connector is crimped unto the wires.

Benefits

Our non-booted Cat6 S/FTP patch cables are best for dense data centers, where cables are crowded. These are also ideal for simple applications and its more cost efficient than our booted cables.

Applications

Our Ethernet Cat6 S/FTP cables are compatible with computer devices such as routers, patch panels, modems, switches and hubs. For keen protection against high EMI’s, Cat6 S/FTP patch cables gives extreme shielding that you can easily install in home and office applications, in modems, routers, servers, hubs, printers, switch boxes, gaming console, VoIP, computers and many more.

Cat6 Crossover S/FTP Patch Cable

Unifiber carry Cat6 S/FTP Crossover cables when you want to connect devices without using hubs or switches. Our Cat6 S/FTP crossover cables are shielded and terminated with 50 Micron gold plated contacts RJ45 plugs at each end. With crossover cables, you can easily connect two computers, still keeping great signal integrity.

Conductors: 24AWG or 26AWG or 28AWG stranded bare copper.
INsulation: polyolefin
Color code:

• pair1: blue ,white/blue
• pair2: orange,white/orange
• pair3: Green,white/Green
• pair4: Brown,white/brown

Ripcord: under jacket
Jacket: pvc or LSZH
Standards: UL444/CSA-C22.2 No 214,Type CM
EIA/TIA-568A and EIA/TIA-568B.2,Horizontal cableApplications: internet,computer
UTP: unscreen cable
STP : single shielding Network cable ,Mylar tape,Aluminum-mylar tape and Drain wire
SFTP: Double shielding cable,Mylar tape,Aluminum-Mylar tape and drain wire and bare or tinned copper braid
Network cable Connector detail specification:

• RJ45 8P8C nickel type
• RJ45 8P8C golden type

Wiring Scheme

Mechanical

Unifiber, a Hi-Tech company specialized in developing and manufacturing optical fiber products. Based on strong hardware development, we are offering the most cost-effective cabling solutions on optical networking, data center, FTTx and OEM solution.

Our featured products includes FTTA Waterproof Connectors, indoor/outdoor armored cable assembly, Pre-terminated Multifiber Cables, FTTH flat drop patch cable, LC Uniboot, 6~12 fiber pigtails and MTP/MPO series. We can also provide adapter, attenuator, fused coupler, PLC Splitter, WDM and various of patch panel, terminal box, ODF and tool series products..

Providing the highest quality products and services is always the most important principle to Unifiber, All our products are subjected to strict test according to BELLCORE standard and fully RoHS compliant. Through the efforts of our team, Unifiber has obtained a widespread acknowledgement, Our products continue to enjoy growing acceptance both in China and abroad.